1
00:00:00,470 --> 00:00:02,060
- It's time for our first project.

2
00:00:02,060 --> 00:00:03,540
You don't even have to
have your machine plugged

3
00:00:03,540 --> 00:00:04,830
in for this one.

4
00:00:04,830 --> 00:00:06,280
The machine bundle comes

5
00:00:06,280 --> 00:00:10,550
with five pre-cut and weeded
hashtags, all ready to go.

6
00:00:10,550 --> 00:00:12,220
I'm gonna use the fearless hashtag

7
00:00:12,220 --> 00:00:15,022
and we're gonna place it
right here on the machine.

8
00:00:16,274 --> 00:00:19,230
The first thing I need to do is measure

9
00:00:19,230 --> 00:00:21,829
and cut my transfer tape.

10
00:00:21,829 --> 00:00:23,260
So I'm just gonna do a rough cut,

11
00:00:23,260 --> 00:00:27,649
it doesn't have to be the exact
same size as my hashtag...

12
00:00:27,649 --> 00:00:29,449
(paper cutting)

13
00:00:29,449 --> 00:00:32,770
as long as it's larger than
the image you wanna transfer.

14
00:00:32,770 --> 00:00:34,929
(scissors cutting)

15
00:00:34,929 --> 00:00:39,229
So we'll begin by pulling
this tape from the corner.

16
00:00:39,229 --> 00:00:41,369
This is the piece that
we actually wanna use.

17
00:00:41,369 --> 00:00:43,950
If you have a hard time
getting that corner to start,

18
00:00:43,950 --> 00:00:47,009
you can use the tip of your
weeder and kind of pop it open.

19
00:00:47,009 --> 00:00:48,689
(tape peeling)

20
00:00:48,689 --> 00:00:53,277
So I saved this and I like
to reuse it again later.

21
00:00:53,277 --> 00:00:56,259
We'll just place it centered

22
00:00:57,408 --> 00:01:00,604
and use our scraper to burnish it down.

23
00:01:00,604 --> 00:01:02,719
(scraping)

24
00:01:02,719 --> 00:01:05,250
You want really good adhesion right here.

25
00:01:05,250 --> 00:01:07,500
(scraping)

26
00:01:09,140 --> 00:01:10,602
And then we'll turn it over.

27
00:01:10,602 --> 00:01:11,435
(tape peeling)

28
00:01:11,435 --> 00:01:12,840
And one of my favorite tips is,

29
00:01:12,840 --> 00:01:15,599
instead of doing it this
way and pulling it off,

30
00:01:15,599 --> 00:01:17,109
I always make sure I turn it over

31
00:01:17,109 --> 00:01:20,703
and remove the backing at a
really sharp angle right here.

32
00:01:20,703 --> 00:01:22,640
(tape peeling)

33
00:01:22,640 --> 00:01:24,879
You'll have better success
getting all of the pieces

34
00:01:24,879 --> 00:01:26,909
to pop right onto your transfer tape.

35
00:01:26,909 --> 00:01:29,462
Now we're ready to
apply it to our machine.

36
00:01:31,664 --> 00:01:34,453
(scraping)

37
00:01:34,453 --> 00:01:36,260
So we're just gonna stick it
on right where you want it

38
00:01:36,260 --> 00:01:39,000
and then burnish it again
with our Cricut scraper...

39
00:01:40,900 --> 00:01:43,367
and then I like to use the tip of this,

40
00:01:43,367 --> 00:01:45,677
and peel it off.

41
00:01:45,677 --> 00:01:48,685
(tape peeling)

42
00:01:48,685 --> 00:01:51,239
And now your first project all done,

43
00:01:51,239 --> 00:01:52,593
hashtag fearless.